I don't know much about this, but looks pretty decent.
I notice that Zinc and Phos are really high.
It did shear down to a 30 weight (which is normal for this engine.)
I did switch this oil out with 0W-30 ESSO XD-3, which makes this engine run better and won't shear down as bad.
The following results were obtained using John Deere Oilscan (Edmonton Lab).
Hours on Oil: 269 hrs.
Mileage on Oil: 17,843 kms (11,089 miles)
Metals (ppm)
Iron (Fe) 32
Chromium (Cr) 1
Lead (Pb) 5
Copper (Cu) 5
Tin (Sn) Aluminium (Al) 6
Nickel (Ni) Silver (Ag) Titanium (Ti) Vanadium (V) Contaminants (ppm)
Silicon (Si) 16
Sodium (Na) 3
Potassium (K) 12
Water (%) Coolant No
Fuel (%) 2
Soot (%) 0.1
Additives (ppm)
Magnesium (Mg) 280
Calcium (Ca) 2680
Barium (Ba) Phosphorus (P) 1624
Zinc (Zn) 1942
Molybdenum (Mo) 2
Boron (B) 246
Physical Tests
Viscosity (cSt 100C) 12.2
Physical / Chemical
Base Number (mgKOH/g) 9.2
I notice that Zinc and Phos are really high.
It did shear down to a 30 weight (which is normal for this engine.)
I did switch this oil out with 0W-30 ESSO XD-3, which makes this engine run better and won't shear down as bad.
The following results were obtained using John Deere Oilscan (Edmonton Lab).
Hours on Oil: 269 hrs.
Mileage on Oil: 17,843 kms (11,089 miles)
Metals (ppm)
Iron (Fe) 32
Chromium (Cr) 1
Lead (Pb) 5
Copper (Cu) 5
Tin (Sn) Aluminium (Al) 6
Nickel (Ni) Silver (Ag) Titanium (Ti) Vanadium (V) Contaminants (ppm)
Silicon (Si) 16
Sodium (Na) 3
Potassium (K) 12
Water (%) Coolant No
Fuel (%) 2
Soot (%) 0.1
Additives (ppm)
Magnesium (Mg) 280
Calcium (Ca) 2680
Barium (Ba) Phosphorus (P) 1624
Zinc (Zn) 1942
Molybdenum (Mo) 2
Boron (B) 246
Physical Tests
Viscosity (cSt 100C) 12.2
Physical / Chemical
Base Number (mgKOH/g) 9.2