Recent Topics
2008 Kia Sportage V6 - 10w30 or 5w30?
by JGmazda
Yesterday at 11:55 PM
Vibration And Pull To Right
by BlueOvalFitter
Yesterday at 10:14 PM
RLI in Direct Injection Applications
by FlyPenFly
Yesterday at 09:16 PM
budget car battery recommendation?
by Carbon12
Yesterday at 09:13 PM
Halloween Funny
by StevieC
Yesterday at 08:46 PM
Garage Door opener lighting?
by SuperDave456
Yesterday at 08:31 PM
Ford Ranger Oil and Filter Recommendations
by CamBurt33
Yesterday at 08:24 PM
17' Nissan Sentra Turbo-Has anyone here drove one?
by skyactiv
Yesterday at 08:20 PM
Marine diesel 4,000 hour service interval
by DeepFriar
Yesterday at 07:40 PM
Wagner OEX Brake Pad?
by demarpaint
Yesterday at 06:32 PM
If you think...
by MolaKule
Yesterday at 06:09 PM
Recommended vs Required oil for a 2012 Honda Pilot
by Keats
Yesterday at 05:58 PM
E85 concentration level and pump signage
by 04SE
Yesterday at 05:57 PM
Valv SynPower 5W/30, 3500mi, 106k mi, 06 Sentra
by silversapphire
Yesterday at 05:53 PM
HVAC help
by Brybo86
Yesterday at 05:42 PM
Who makes the Rural King “Harvest King” brand oil
by tech230
Yesterday at 05:31 PM
Elf evolution nf900 - aircooled suitability
by Cornershop
Yesterday at 05:15 PM
Cash for Clunkers - How they destroyed the engines
by StevieC
Yesterday at 04:56 PM
Squirrel takes out Chippy
by chiefsfan1
Yesterday at 04:13 PM
Update to newer ver. of Android
by SHOZ
Yesterday at 04:06 PM
Newest Members
Lee19890328, re5513, MAALI348, hellokitty, B3YOND
63191 Registered Users
Who's Online
22 registered (Cornershop, danielLD, bigj_16, cb4017, BlueOvalFitter, cadfaeltex, 1 invisible), 1264 Guests and 14 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
63191 Members
66 Forums
272678 Topics
4527621 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Topic Options
#1741044 - 01/12/10 10:13 PM Mazda B2200 engine questions
otis24 Offline


Registered: 10/30/05
Posts: 1569
Loc: South Dakota
I am looking at a 1990 Mazda B2200 long bed pickup. It has 155k miles, manual tranny. I have just seen pics, not driven yet. I had heard that the 2.2 Mazda engine was prone to head problems (cracking). Is this true?
_________________________
1991 Chevrolet K1500 (4.3, 4x4, 86k miles)

2016 Dodge Grand Caravan
(3.6 V6) 46500 miles

Top
#1741086 - 01/12/10 10:57 PM Re: Mazda B2200 engine questions [Re: otis24]
expat Offline


Registered: 05/12/09
Posts: 5273
Loc: Canada
I think the Mazda B's were good little truck, they did not tend to rust like some of their ilk, but I don't think their engines
fare so well.

Top
#1741108 - 01/12/10 11:16 PM Re: Mazda B2200 engine questions [Re: expat]
Silk Online   content


Registered: 07/26/03
Posts: 3793
Loc: New Zealand
The 12 valve head was very prone to warping,cracking,and going soft.But so long as they aren't overheated they will last a long time.
_________________________
1987 BMW R65 - Penrite V Twin 20/50
2005 Nissan Expert - MSL 5/30
1996 Volvo T5 - Cocktail, don't ask.

Top
#1741332 - 01/13/10 08:04 AM Re: Mazda B2200 engine questions [Re: Silk]
bigmike Offline


Registered: 06/05/09
Posts: 3239
Loc: Florida
I owned a 1986 Mazda B2000 for 11 or so years. Eventually had to do a rebuild on the engine at 137000 miles. Unknowingly, my thermostat gauge didn't work and I overheated it at 148000 miles and cracked the head. Had a friend who found a 1988 2.2l that I dropped in and never had another problem with it. I did install an electric fan though! Sold it at 202,000 miles.

I changed the manual tran. fluid to synthetic (as well as the differential) and it shifted 100% better. Changed the clutch when I did the engine swap. Had to replace the differential at around 190,000. I beat the truck up alot though, so I'm not sure if I could give you an "on average" picture.

Those trucks were pretty solid, but overheating was always an issue with them. I had alot of problems with spark plug wires cracking due to their placement over the exhaust manifold. Carb needed to be rebuilt when I sold it. The butterfly wouldn't open/close correctly. Ball joints were shot as well.

If you want to know more about them, just ask.
_________________________
Take care,
-Mike

2006 Chevy Silverado LT 4.8 - QS 5w30, Napa Gold
2009 Honda Accord LX-P 2.4 - QS UD 0w20, P1 14610

Top
#1741533 - 01/13/10 12:01 PM Re: Mazda B2200 engine questions [Re: bigmike]
BovineScapegoat Offline


Registered: 11/06/09
Posts: 241
Loc: Southern Ontario
My folks bought a 1993 B2200. That was the last year for real Mazda trucks in North America. The engine and auto tranny were always great. No problems. Only reason we replaced the vehicle in 2007 was it was rusting away. Replaced the starter and fixed a Power steering leak. That was the only repairs on this vehicle EVER. Great truck if it has been rust proofed/under coated. Oh yeah... had 190,000 Kilometers on it.
_________________________
05 Mazda3 2.0 Castrol Edge 5W30 + Motorcraft FL910S
Redline MT-90, Filtermag, Shark Fin Antenna
07 Focus 2.0 any dino 5W30 + Motorcraft

Top
#1742216 - 01/13/10 10:34 PM Re: Mazda B2200 engine questions [Re: BovineScapegoat]
MONKEYMAN Offline


Registered: 06/24/04
Posts: 1912
Loc: St. Louis
I had a 92 B2600i. It was a rude awakening when my U-joint on the drive shift went bad. Mechanic called me saying "you are not going to like this". It was non-serviceable. The entire drive shaft had to be replaced. I was told it went for over $700 at the dealer. My mechanic who used to race had a customer drive shaft made with serviceable U-joints for half the price. I got rid of it due to a blown head gasket.
_________________________
Truth alone triumphs, not untruth.

2017 Elantra SE

Top
#1742391 - 01/14/10 07:03 AM Re: Mazda B2200 engine questions [Re: MONKEYMAN]
bigmike Offline


Registered: 06/05/09
Posts: 3239
Loc: Florida
I know on the 86-87 years there were serviceable driveshafts. I replaced the U joints on mine.

I have to say that working on those trucks was pretty easy.
_________________________
Take care,
-Mike

2006 Chevy Silverado LT 4.8 - QS 5w30, Napa Gold
2009 Honda Accord LX-P 2.4 - QS UD 0w20, P1 14610

Top