Please help! Can't find u-joints for the Volvo ste

Status
Not open for further replies.
Joined
Oct 8, 2009
Messages
2
Location
EU
Hello!
I would like to buy a complete yokes with u-joints for the Volvo sterndrive. Volvo sterndrive model »100«. (motor Volvo Penta 4 cylinder 98kW, 30 years old or more).
( please see the picture on the link below): http://www.avto.net/mornar2003//ad.asp?id=74438

Do you have this part for sale? What would be the price?
It is more than eight monts that I am unsuccessuful traing to find this part.
 
Contact Volvo engineering and see what other models may have used the same or similar part. Be sure to measure the the complete unit and diameter of the splines. I would think you may be able to find a similar assembly that could be machined to fit. But take very close and complete measurements of all the components. You may want to even send them an imprint of the splines by putting ink on the ends of them and pressing onto a sheet of paper. You may also be able to have a machine shop retro fit a newer one to similar dimensions. But the job will be easier if the splines match. The design engineering group should have the original specifications of that unit. If you can find a model & serial number this will help them to locate any drawings. If you send me the model & serialnumbers I will contact an outdrive rebuilder here that has been in business over 40 years and see if there is an old unit here.
 
Last edited:
There are 3 models made AQ100, AQ100b AQ100s if you start searching on google you should be able to find replacement parts and maybe even a used assembly. I called an outdrive service here and you have to have the serial number for the unit. If you can get that for me I will check with them and see if they can get the parts here.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom