jhellwig
Thread starter
So I finally got the parts, good weather and time to get back to this. Got the carb reassembled. Not happy with how the bushing turned out. It was supposed to be the right one but instead of being a 1/4” shaft like everything says it is 9/32 so I drilled it to fit and managed to mangle the bushing in the process but it is still useable. Not as tight as I would like but if it doesn’t work I will take it to a machine shop and have it bored properly. The seal isn’t pretty either but will try it. Still need to get an oring for the needle valve since it wasn’t in the kit.