MolaKule
Staff member
A basic rod and disk are forged and machined to make a wheel axle, with the rod at a right angle to the disk. The other end of the rod is splined inside the differential housing.
The disk is further machined and tapped to make a wheel hub.
It was later found that cracks were occurring where the rod meets the disk.
Supply the missing word:
A ___________ geometry at the rod-disk interface would have prevented cracks from forming.
Open to all.
The disk is further machined and tapped to make a wheel hub.
It was later found that cracks were occurring where the rod meets the disk.
Supply the missing word:
A ___________ geometry at the rod-disk interface would have prevented cracks from forming.
Open to all.