lug bolts ?
- Thread starter Ndx
- Start date
- Status
You're the one who has to drive with that wheel...
- Joined
- Jun 13, 2013
- Messages
- 3,075
Make sure this is the right seat and length...
I have RAD bolts on my car, they are tough.
Not pretty though, finish is dull.
RAD German Lug Bolts 12mmx1.5, 30mm Shank, Cone Seat, 17mm Hex (Box of 20)
http://www.amazon.com/German-Bolts-12mmx...+bolt+12.5+30mm
I have RAD bolts on my car, they are tough.
Not pretty though, finish is dull.
RAD German Lug Bolts 12mmx1.5, 30mm Shank, Cone Seat, 17mm Hex (Box of 20)
http://www.amazon.com/German-Bolts-12mmx...+bolt+12.5+30mm
Last edited:
JHZR2
Staff member
I have a rad boot with the security head in some of my wheels and they are very trustworthy, IMO.
Originally Posted By: wkcars
I would recommend ordering from reputable seller/dealer. There are counterfeit bolts out there, not these particular ones, but counterfeit bolts in general.
Excellent advice ! Beware the Chinese hardware.
I would recommend ordering from reputable seller/dealer. There are counterfeit bolts out there, not these particular ones, but counterfeit bolts in general.
Excellent advice ! Beware the Chinese hardware.
Originally Posted By: KB2008X
Originally Posted By: wkcars
I would recommend ordering from reputable seller/dealer. There are counterfeit bolts out there, not these particular ones, but counterfeit bolts in general.
Excellent advice ! Beware the Chinese hardware.
+1
Originally Posted By: wkcars
I would recommend ordering from reputable seller/dealer. There are counterfeit bolts out there, not these particular ones, but counterfeit bolts in general.
Excellent advice ! Beware the Chinese hardware.
+1
The stock lug nuts for my Jeep are chrome plated steel. They get rust between the steel nut and chrome. At that point they need a 19.5mm socket for removal. I am replacing the beat up ones with SS ones.
Kestas
Staff member
- Status
Similar threads
