- Joined
- Jun 1, 2023
- Messages
- 4
Hello Gentlemen,
My '09 Buell 1125cr motorcycle (liquid cooled, wet clutch, Rotax manufactured engine - not Harley engine) is balky shifting, particularly finding neutral. It's very notchy and requires a lot more lever force to change gears than it used to. In the past it has shifted very smoothly. The clutch does not drag when disengaged.
I have used automotive oil (with friction modifiers), AMSOil Dominator 15W-50, in the past based on a recommendation without checking the specs myself and the clutch started slipping. I dumped it and filled it with Rotella T6 which is JASO MA2 certified (good for wet clutches). It got better but was not gone. It eventually took three oil changes in rapid succession, cleaning the clutch fiber disks with solvent multiple times and a little bit of riding in between for the slipping to totally abate. I rode around for a few miles in between changes, enough to get the oil good and hot and circulate it throughout the clutch, but, avoided any slipping as to not wear the clutch plates. I've since only used JASO MA2 certified oil (formulated for wet clutches) and the slipping is long gone. I mention this to assert that I'm not interested in revisiting this laborious adventure. I'll only consider using JASO MA2 certified oils.
My most recent oil change was 1.5K miles ago and I used Valvoline 10W-40 Full Synthetic Motorcycle 4-Stroke Oil.
This was one of the best shifting transmissions I've ever owned (three dozen bikes over the years) and I'm determined to make it so again.
Has anyone else experienced this kind of shifting difficulty?
Has anyone found an oil (or other remedy) they can recommend that enables smooth shifting on a high-torque engine that doesn't cause the clutch to slip? Buell recommends SAE 20W-50 (HD 360 - Harley's own brand).
Thanks.
My '09 Buell 1125cr motorcycle (liquid cooled, wet clutch, Rotax manufactured engine - not Harley engine) is balky shifting, particularly finding neutral. It's very notchy and requires a lot more lever force to change gears than it used to. In the past it has shifted very smoothly. The clutch does not drag when disengaged.
I have used automotive oil (with friction modifiers), AMSOil Dominator 15W-50, in the past based on a recommendation without checking the specs myself and the clutch started slipping. I dumped it and filled it with Rotella T6 which is JASO MA2 certified (good for wet clutches). It got better but was not gone. It eventually took three oil changes in rapid succession, cleaning the clutch fiber disks with solvent multiple times and a little bit of riding in between for the slipping to totally abate. I rode around for a few miles in between changes, enough to get the oil good and hot and circulate it throughout the clutch, but, avoided any slipping as to not wear the clutch plates. I've since only used JASO MA2 certified oil (formulated for wet clutches) and the slipping is long gone. I mention this to assert that I'm not interested in revisiting this laborious adventure. I'll only consider using JASO MA2 certified oils.
My most recent oil change was 1.5K miles ago and I used Valvoline 10W-40 Full Synthetic Motorcycle 4-Stroke Oil.
This was one of the best shifting transmissions I've ever owned (three dozen bikes over the years) and I'm determined to make it so again.
Has anyone else experienced this kind of shifting difficulty?
Has anyone found an oil (or other remedy) they can recommend that enables smooth shifting on a high-torque engine that doesn't cause the clutch to slip? Buell recommends SAE 20W-50 (HD 360 - Harley's own brand).
Thanks.