Search results

  1. M

    Getting cigar/cigarette smell out of leather coat

    Coffee straight out of the can, not used, is very good at absorbing odors. I would put the jacket with fresh ground coffee in a closed container, for a few days. I haved removed odors from some dresser drawers this way.
  2. M

    How to shampoo head liner? Cannot accept no!!!!!!

    Fresh coffe out of the can is very good at absorbing odors. I cleaned up some smelly dresser drawers this way.
  3. M

    Seized brake bleeder?

    This is something I have never tried, but have been told by several people that it works. Heat the thread very hot and then apply parafin to the joint, and then let it cool. Then it comes apart like magic.
  4. M

    propane

    The local hardware store has 20lb. tanks with 15lb. propane in the tanks. The local 7-11 store has 17lb. propane in the tanks. What is happening?
  5. M

    Goodbye Ultra!

    The local walmart has ultra for $25.
  6. M

    Seafoam - have you used it, did it do anything

    I have used seafoam in my two stroke engines for years. 2 oz. per gallon of oil gas mixture. Instead of 6 to 8 pulls to start it is 2 sometimes 3 pulls.
  7. M

    Where to buy Lubrizol???

    I confess. I was having a senior moment. The oil that I bought was LUBRPLATE.
  8. M

    What have you learned from an oil temp gage?

    many years ago I installed an oil temperature gauge in my car. At that time I was able to buy the sending unit for the gauge that replaced the oil drain plug.
  9. M

    Where to buy Lubrizol???

    I bought multigrade lubrizol motor oil by the case from Downers Grove Auto Parts in Ilinois. My best guess is that this was in the 60's, maybe in the 70's.
  10. M

    Where to buy Lubrizol???

    Lubrizol did have finished products. Back in the 60's I bought multigrade lubrizol at the local auto parts store.
  11. M

    At -20 F, How Much Time For Oil Flow At Startup?

    Those pistons have shrunk by a few thousanths. They are rattling arond in the cylinders until the are up to operating temperature.
  12. M

    Question for everyone about breakin oil...

    I had the idea that knurling the piston increased the diameter of the piston so that it fit tighter in the cylinder. Rather than buy oversize pistons you increased the size of the old ones.
Back
Top