Recent content by wapacz

Originally Posted By: Geauxtiger Just be sure you don't drain it over a surface you want to keep nice. I learned to take my portable out into the grass to drain the rusty water into the yard. Good iron nutrition for the grass! Listen to this guy. I made the mistake of draining mine on the...

I work in real estate(photography) and the common rate I see in most coaching stuff that I have seen and what is in my area is 6%. You can get some agents to go down to 5%. The problem is this is a double edged sword becuase agents will choose to show a 3% house over a 2.5% house. So if they...

The craftsman pro line of screw drivers were made by western forge. As a side note western forge also made home depots husky pro screw drivers. Any ways long story short Ideal bought out western forge. Which is why the craftsman pro and husky pro screw drive lines went away. So here is the good...

Originally Posted By: Chris Meutsch Can someone enlighten the group as to why former Chrysler (MB), current Chrysler (Fiat) and all the brands of those owners are usually at the very bottom? Is it ownership? Poor parts supplier reliability? Poor overall engineering? You'd think after a while...

A quick google tells me that you need to look for a sprayer with viton seals. Which can withstand bleach better than regular seals. The problem is that by the time you source a few of these bottle you are probably better off getting a pump sprayer that is rated for bleach. Like one of these...

I have thought about getting one of these kits that has all the weird bits your run into every now and then. https://www.ifixit.com/Store/Tools/54-Bit-Driver-Kit/IF145-022-1

If you are going to be doing a ton of crimps look into ratcheting crimper. also check out paladin and greenlee.

The trick with 476 is to use a water bottle and mist a panel. Then go over it with the wax. This will leave a very thin layer of 476 and be easy to buff off by hand. As a side note fleetwax 855 and mold release 900 are the same thing as 476. So check into those to find out which one you can...

Originally Posted By: c502cid You can claim the difference between the rate you are paid and the IRS rate on your taxes. My company truck use is taxed as income. I'd much rather pick and use my own car although the gas card sure is nice some days! If I remember correctly, if you are w2ed the...

If you dig into the irs stuff you find out they figure something like 23 cents a mile for deprecations. The rest of the 56 cent is there to cover gas, insurance, increased chance of accident, general maintenance. Which means with the irs rate you get 33 cent a mile to cover that. With your rate...

here is a good post from 2005 om the gm olm http://www.bobistheoilguy.com/forums/ubb...0036#Post130036

Originally Posted By: David1 Why do people say that Synthetic or Synthetic Oil in the USA would not be Synthetic in other countries say U.K or parts of Europe or perhaps even Canada? Does USA Downgrade its Oil??? Im confused about this... Is there a post about this? I just hear people say...

Originally Posted By: TAvsGN Stepdaughters 2000 300m, there is a 2inx3in hole in each front wheel well that has a rubber plug. Remove the plug and then stick a long rachet extension in towards the front of the car hoping to find the single 10mm nut. Get that off without dropping it, and then...

here is an older post that explains the olm. Of course the information at this point is a bit dated seeing as it is a post from 2005,but it is a good starting point to understanding it. http://www.bobistheoilguy.com/forums/ubb...0036#Post130036

Originally Posted By: Carbon What is the dealer going to charge to re-balance or rotate those tires? DT will do that free, I think. Another local gm dealership does free rotations with an oil change. Seeing as I go about 10 k per oil change it usually lines up pretty good. As for rebalanced I...