Thank you for the tips this will be a project for this upcoming weekend and needed to know whats ahead of me. ill be sure to triple check the TC seating before putting it back together. any additives that i should add to it or recommend or should i stick to just adding mercon V.
Hi everyone just had a quick question to any gear heads about removing and installing a ford transmission on an 06 explorer what am i looking at as far as time and difficulty. Any quick tips or guides would be greatly appreciated. Reason for removal is reverse gave out and these transmissions...
running the truck on Kendall liquid titanium GT-1 5w-30 with an stp extended life oil filter.
Did some research and a common problem is the pick up tube screen being slightly clogged so dropping the pan is what im doing this weekend. worst case it might be the bearings.
Thrown it to neutral and it goes back to normal when im at a stop.i know the 4.7 are notorious for sludge issues im looking to removing the pan and looking what might be the issue. Yes the gauge goes all the way down till i let off the brake.
2003 Dodge ram 1500 4.7 when driving for 15 minutes oil pressure gauge drops at stop lights and when brake is let off pressure comes back to normal. Not the oil pressure sending unit that was changed twice. What the heck is going on? Is this common for the magnum engines?
https://offerup.com/item/detail/884298475/
Saw these filters for sale for $2 bucks each what do you guys think should i invest in a couple of them and what are your guys experience with those type of filers