Recent content by kart17

Gas dryers need a Metal vent and I was told many years ago that they were $.50 a load cheaper to run, would be higher now. A Electric Hot Water heater is the biggest used of electricity in your home.

My tool of choice :) If the Inducer motor will not start the Capacitor may be bad. I keep a spare in the furnace compartment

A rare but something that can happen is that the rubber brake line is the problem. This just happened to a friend and the problem was solved by replacing the rubber line.

Have used PP or PPU in all four vehicles for many years, no problems at all. 120,000 Miles 110,000 80,000 70,000

They are a real small Company and their products are Great. I have a can of Marque D'Elegance and you will never look back and it will last forever on the car and in the can. Just put it on very very thin and it will buff right off.

In the Rust Belt area I can only get 50K miles before needing front Rotors and brakes. The Pads lock up in the slides and get crooked and wear on a angle. Rust will also fill up the Cooling Vanes on the Rotor. Wheel Bearings take a beating and are tough to remove until you figure out how to...

Thinking about switching to G-05 in a 2013 Malibu and a 2012 Camaro. Hard to figure out what would be the best choice to use after a Flush. Looking for some input on this.

Originally Posted by Dadillac https://flashautodetailproducts.com/products/brown-royal-non-acid-wheel-tire-cleaner Enough said. Don I have been using Brown Royal for a few years and very happy with the results. The Winters in Upstate New York are a little long and can be Nasty...... I have...

Originally Posted by JTK It's a pain, but the best thing you can do for longevity is to remove the pads, clean, lube all associated parts and reinstall. In NYS they use Liquid Calcium on the roads, the State guys claim "You can hear your car RUST as you drive" So when I take off the Snow...

Plastic Anchors Drill a 1/4" hole and drive the plastic anchor in. Attach box with 1" #10 screw

The Borax is great to remove the ant problem. That's a lot of water out of the sill plate........you need to fix that first. Your hot and humid weather adds a lot to your problem.

I have the Update, which is what I wanted from the start. Very nice because of the option to run a HEI, gauges and a lot of other things. Now all I need is time to do the work.............

I purchased a complete American Autowire kit for my 64 Impala at the Syracuse Nationals. I think the 2 crimper set direct from American Autowire might be the best setup for me. Lots of crimps to make a some are the twin type. Free shipping, no tax https://www.summitracing.com/parts/aww-510587

Just ordered a DEKA AGM for my Wife's 2012 Camaro. Battery is in the trunk. Driving to Florida the 1st of March and had the original battery so I figured it was time. Living in Upstate New York the car is not driven in the Winter but has a Battery Tender connected all the time it is parked...

I have had a big difference in shipping cost if I wait a day or two to order. Seems like a new supply arrives at the warehouse and changes shipping location. I still find their prices including shipping cheaper than the local Advance/AZ/Pep Boys