Recent content by Dixiejack

Since I only have about 150 miles on the 20w50, would it be okay to add the Auto-RX and change the oil and filter at 1,500 miles and add another Auto-RX treatment, using 10w30 and then get back to using 10w30 as in the past?

I ordered a bottle of Auto-rx today. Should have it in a few days and I am going to change oil and filter and add the Auto-rx. I will only be driving about a 100 miles by then. Thanks for all the advice. Hope that solves my tapping noise and prevents any future problems. Mileage will tell.

Thanks for the replies. The mechanic said I needed to go to a heavier weight oil because of the mileage. Another question. I bought the Jeep used and the oil was black. Didn't know how many miles was on the oil, so I had it serviced. After about 2 or 3 hundred miles the oil was black (not...

Hello. This is my first post. I have a '97 Wrangler tj 4 banger with 100,000 miles. Doesn't use oil and has good oil pressure. Several days ago I had my oil and filter changed and the mechanic put in 20W50. I had been running 10W30. Now I hear a slight clicking or tapping noise when I crank up...

I did forget to mention that I had the injectors cleaned and adjusted. And most of my driving is commuting. I am running Castrol 10w30. Next change I will go with 10w40. What is the concensus on the best brand of non synthetic oil? Maybe I should change brands. I had used Castrol 10w30 in my '94...

When I bought my '97 Wrangler TJ,2.5 4 banger, it had 92,000 miles. Oil was black, but no sludge. I changed the oil and filter and checked the oil after about 200 miles and it was black. I changed the oil and filter after 2,500 miles, check it at about 150 miles and again the oil was black...