Subtitle; How to destroy good oil in 3000 miles or less.
51,200Mi on engine. Oil in use about 5 months. 2/3 of this was my normal running around and right smack in the middle of the whole kabob was 1000 miles of all highway. 3 oz of ARx was in this which I have ran out of so I it is no longer being used. I sampled this after a couple days of running to work and back without driving my loop I drive if I wanted to get it hot. I did this both to get a feel for how much fuel Im inducing under these conditions...and I also had just received my jug of RLI and I really just wanted to put it in.
Dyson RAW this time; Cant really correlate to previous BSLabs tests I have had.
Code:
Iron 27
Copper 6
Tin 0
Lead 0
Chromium 0
Nickel 0
Aluminum 3
Titanium 0
Silver 0
Calcium 1581
Magnesium 45
Zinc 799
Phosphorous 550
Barium 0
Molybdenum 350
Antimony 0
Silicon 13
Sodium 18
Boron 8
Potassium 0
Vanadium 0
V40C 38.7
V100C 7.2
TAN 3.95
Flash 330F
Oxidation 20
Nitration 9
KF Water 405
TBN 1.6
Fuel 1.2%
Soot 0
Glycol 0
VI 152
Sulfate 24
51,200Mi on engine. Oil in use about 5 months. 2/3 of this was my normal running around and right smack in the middle of the whole kabob was 1000 miles of all highway. 3 oz of ARx was in this which I have ran out of so I it is no longer being used. I sampled this after a couple days of running to work and back without driving my loop I drive if I wanted to get it hot. I did this both to get a feel for how much fuel Im inducing under these conditions...and I also had just received my jug of RLI and I really just wanted to put it in.
Dyson RAW this time; Cant really correlate to previous BSLabs tests I have had.
Code:
Iron 27
Copper 6
Tin 0
Lead 0
Chromium 0
Nickel 0
Aluminum 3
Titanium 0
Silver 0
Calcium 1581
Magnesium 45
Zinc 799
Phosphorous 550
Barium 0
Molybdenum 350
Antimony 0
Silicon 13
Sodium 18
Boron 8
Potassium 0
Vanadium 0
V40C 38.7
V100C 7.2
TAN 3.95
Flash 330F
Oxidation 20
Nitration 9
KF Water 405
TBN 1.6
Fuel 1.2%
Soot 0
Glycol 0
VI 152
Sulfate 24