Alisyn

[Falex]

This is my first post here. One day I got thinking. Hey! You know, when you were in the good ole USAF, you used to use Moly D in the wheel grease, pretty slick stuff. Hmmm, I wonder if anyone uses that in an oil, turns out there is, quite a few. Anyway, I started looking around thinking about high performance and aircraft ect, "my background". Found ThomasNet, which lead me to www.AerospaceLubricants.com, who has this Alisyn, ProDrive type 1,2,6. Type 1 is the >>0W oil. I run it and their 0W-20 in my car. Much quieter, better gas mileage, and seemingly lower EGT's. Does anyone have any experience with this oil? Thanks in advance.
Here is some of the test information that was sent from them.

http://www.brownbucket.com/buckets/jbrown/SF1.pdf
http://www.brownbucket.com/buckets/jbrown/SF2.pdf
http://www.brownbucket.com/buckets/jbrown/SF3.pdf
http://www.brownbucket.com/buckets/jbrown/SF4.pdf

and no I have not sent the oil for an, VOA or an UOA as of yet.

 

[Dad2leia]

Looks very interesting. What kind of car do you run iit in and what's the cost per?

 

[buster]

Called them today. They are 100% PAO. He said they use NO esters.

 

[Falex]

Quote:

---

Looks very interesting. What kind of car do you run iit in and what's the cost per?

---

I run it in my Evo IX. The Type 1 is about $11.00 a quart, and the gallon is about $31.00.

 

[Dad2leia]

Buster, is that a bad thing?

I must admit though, even as boutique oil oriented as I am, $11 per quart or $31 per gallon seems a tad high for strictly PAO based, IMHO.

 

[Falex]

More information on Alisyn

Packaging 1 Qt. Bottle


SAE No.

ISO VG 15


API Gravity 37.6


Specific Gravity @ 60°F/60°F 0.8368


Temperature Range -80 to 300 °F


Evaporation 6.5 hrs @ 400°F 2.0 %


Viscosity @ -40°F 2560 cSt


Viscosity @ 0°F 247 cSt


Viscosity @ 100°F 14.20 cSt


Viscosity @ 210°F 3.16 cSt


Viscosity @ 100°F 74.3 SUS


Viscosity @ 210°F 36.7 SUS


Viscosity Index 85


Flash Point 360 °F


Fire Point 390 °F


Pour Point -80 °F


Weld Load @ Load 200 kg


Steel-on-Steel Wear @ 1200 rpm, 40 kg, 52100 steel, 1 hr 0.65 mm


Rust Preventive Properties @ Procedure A Pass


Rust Preventive Properties @ Procedure B Pass


Oxidation Test Viscosity Incr. @ 212°F 0.97 %


Oxidation Test @ Precipitation No., Orig. 0.0
0.03


Foam Test - Sequence 1 (mls @ 5 min. air/mls settling) 15/0 sec


Foam Test - Sequence 2 (mls @ 5 min. air/mls settling) 15/0 sec


Foam Test - Sequence 3 (mls @ 5 min. air/mls settling) 20/0 sec


Falex EP Test- Last Pass Load 4500 lbs


Falex EP Test- Conversion to Contact Pressure 210000 psi


Timken Load Arm @ Fail Load +90 lbs


Timken Load Arm @ OK Load 90 lbs


FZG Gear Test @ Load Stage + 12 Stage


Load Wear Index 36.30


Last Non-Seizure @ Load/Wear Scar 80/0.41 kg/mm


Last Seizure @ Load/Wear Scar 160/2.19 kg/mm


Series Alisyn® ProDrive 21 Type 1


Type Type 1 <<0W