Analysis by OAI....
Physical/Chemical Properties:
Vis @ 100C, 13.85 (spec sheet lists 14.0)
TBN(ASTM D-4739), 10.0 (spec sheet indicates TBN > 11.0, using ASTM D-2896, so that checks)
Additive Levels:
Si, 2 ppm (anti-foam additive)
Boron, 110 ppm (corrosion inhibitor)
Ca, 2545 ppm (detergent/dispersant)
Mg, 842 ppm (detergent/dispersant)
P, 1211 ppm (primary AW additive)
Zn, 1451 ppm (primary AW additive)
Recent Batch Data (phone discussion from Tech Support):
Noack Volatility, 6.7%
HT/HS viscosity, 4.0 Cp
I'll be using this SJ/CF type formulation in a 2002 Audi TT, with the 225 Hp engine....
Physical/Chemical Properties:
Vis @ 100C, 13.85 (spec sheet lists 14.0)
TBN(ASTM D-4739), 10.0 (spec sheet indicates TBN > 11.0, using ASTM D-2896, so that checks)
Additive Levels:
Si, 2 ppm (anti-foam additive)
Boron, 110 ppm (corrosion inhibitor)
Ca, 2545 ppm (detergent/dispersant)
Mg, 842 ppm (detergent/dispersant)
P, 1211 ppm (primary AW additive)
Zn, 1451 ppm (primary AW additive)
Recent Batch Data (phone discussion from Tech Support):
Noack Volatility, 6.7%
HT/HS viscosity, 4.0 Cp
I'll be using this SJ/CF type formulation in a 2002 Audi TT, with the 225 Hp engine....