Buffing Pads for Porter Cable 7424XP

[cutlassvillager]

I've been out of detailing for a few years, but would like to get back into it. I got a 7424XP as a present and need to get some pads and a backing plate. I don't need anything too intensive - just looking to do some correcting from a winter of car washes, etc. Anyone have any recommendations?

I was maybe thinking something like this: http://www.chemicalguys.com/Hex_Logic_Buffing_Pad_Kit_p/buf_hexkits_5.htm

I already have quite a bit of Meguiar's Ultimate Compound and Polish but would get something else if it would work better with certain pads.

 

[navseawelder]

I use Lake Country Pads. I have always used the orange pads and they're excellent http://www.tools-plus.com/porter-cable-7424xp.html

 

[anonobomber]

I've used lake country pads and they work pretty well but I've had trouble with their velcro backing coming unglued after a few uses. Right now I'm using the Hex Logic pads like you linked to but a different set from amazon: http://www.amazon.com/Chemical-Guys-BUFHEXKITS8P-Hex-Logic-Buffing/dp/B00BTGDR9A/ I've only used them a couple times so far but am liking them very much. I do not recall which backing plate I use because I've had my 7424xp for a very long time now.

 

[The Critic]

The new Meguiars low profile DA foam pads would be outstanding in this application. The low profile design really improves cut and pad rotation in DA applications.

 

[sciphi]

I've had okay luck and achieved okay results with a cheap Astro Pneumatic backing plate and (believe it or not) Harbor Freight pads. They're available and often on sale.

But, that Chemical Guys kit is pretty tempting for $40 (plus tax) shipped.

 

[cutlassvillager]

Thanks for the good input everyone!