I wouldn't be surprised if they are outsourcing to save $$$$. If so I'll spread the word like never before!
Valvoline V0-105 (CUT OPEN), 8K~ 2013 Impala
- Thread starter 53' Stude
- Start date
- Status
Originally Posted By: car51
Bullwinkle, maybe you could cut one from the Valvoline place and post here for is. I would be interested to see if yours looks like this one or is yellow with blue letters&numbering.
All the ones I've seen (& there's been at least 15 OCIs) look exactly like yours does )on the outside). Maybe I'll see if they'll let me cut the next one, it'll be an even 100K on the 4.6 then. I've used 3 QS3600s on my brother's '87 Tercel 1.5, cut them all, they all looked better than that one (but none of them went 8K either).
Bullwinkle, maybe you could cut one from the Valvoline place and post here for is. I would be interested to see if yours looks like this one or is yellow with blue letters&numbering.
All the ones I've seen (& there's been at least 15 OCIs) look exactly like yours does )on the outside). Maybe I'll see if they'll let me cut the next one, it'll be an even 100K on the 4.6 then. I've used 3 QS3600s on my brother's '87 Tercel 1.5, cut them all, they all looked better than that one (but none of them went 8K either).
Thank you bullwinkle. ;-)
That filter held up just fine. Thanks for the cut and post car51!
Yeah, at least some of the ones I have saw run MaxLife/MaxLife NextGen too
- Status
