JHZR2
Staff member
I got a new lower and am looking for ideas... Pics appreciated.
I'm sort of thinking varmint build with a ss barrel... But no idea really.
I'm sort of thinking varmint build with a ss barrel... But no idea really.
Post your AR builds
- Thread starter JHZR2
- Start date
- Status
My AR in 7.62 x 39. I did not build this from the ground up. I did change the round checked handguard out for a quad rail. My son installed the alg defense trigger. Shown with the 30 round magazine. I plan to go with an eotech red dot scope.
[img:center]http://
[/img]
[img:center]http://
[/img]
[img:center]http://
[/img]
[img:center]http://
[/img]
[img:center]http://
[/img]
[img:center]http://
[/img] [img:center]http://
[/img] [img:center]http://
[/img] [img:center]http://
[/img] [img:center]http://
[/img]
Last edited:
JD Machine .308. Assembled 100% myself. I have many more in 5.56 and 7.62x39, including one in an A1 style wood stock. As soon as I find where I saved the pics I'll post them up.
Wow Jim, thats a Barrel!
Bcm by [email protected], on FlickrBCM 16 in light weight upper with daniel defense lite 12in rail
chopped armalite rear sight
magpul afg and vertical grip
magpul rail cover
magpul ctr stock
magpul moe grip
magpul 10/30 mag
eotech 512
surefire m600
M4's by [email protected], on Flickranderson lower
psa lower parts kit
magpul ctr stock
magpul moe grip
delton 20 in upper
knights ras
aimpoint
Also-
Gen 4 FDE Glock 17 with streamlight TLR-1
Untitled by [email protected], on Flickrbudget build.
everything included was less than $400.
Diamond Back 9 in upper
anderson lower
psa lpk
magpul ctr stock
magpul moe grip
Originally Posted By: spasm3
Wow Jim, thats a Barrel!
22" Stainless fluted HBAR. 6-25x56mm glass. Just shy of 16# empty mag. Yeah, this build got a little out of hand......
Wow Jim, thats a Barrel!
22" Stainless fluted HBAR. 6-25x56mm glass. Just shy of 16# empty mag. Yeah, this build got a little out of hand......
JHZR2
Staff member
Originally Posted By: spasm3
Wow Jim, thats a Barrel!
Sure is. I think thats what I havein the back of my mind.
Also need to decide if I want 5.56 .308 or so,etching else. Choices, choices.
Wow Jim, thats a Barrel!
Sure is. I think thats what I havein the back of my mind.
Also need to decide if I want 5.56 .308 or so,etching else. Choices, choices.
Troy builds it. Featured in the July issue of G&A.
http://troydefense.com/troy-sporting-rifle/
http://www.gunsandammo.com/gun-culture/new-york-lost-troys-pump-action-rifle/
And this is a bolt action...
http://www.gunsandammo.com/first-look/first-look-pof-usa-revolt-rifle/
Cheers!
http://troydefense.com/troy-sporting-rifle/
http://www.gunsandammo.com/gun-culture/new-york-lost-troys-pump-action-rifle/
And this is a bolt action...
http://www.gunsandammo.com/first-look/first-look-pof-usa-revolt-rifle/
Cheers!
Last edited:
Originally Posted By: JHZR2
Originally Posted By: spasm3
Wow Jim, thats a Barrel!
Sure is. I think thats what I havein the back of my mind.
Also need to decide if I want 5.56 .308 or so,etching else. Choices, choices.
If you don't have a .308, I really recommend one (the DPMS G2 looks great for example) but requires a dedicated lower. If you've got a standard lower, you might consider a .300BLK which is all standard parts except for the barrel.
Originally Posted By: spasm3
Wow Jim, thats a Barrel!
Sure is. I think thats what I havein the back of my mind.
Also need to decide if I want 5.56 .308 or so,etching else. Choices, choices.
If you don't have a .308, I really recommend one (the DPMS G2 looks great for example) but requires a dedicated lower. If you've got a standard lower, you might consider a .300BLK which is all standard parts except for the barrel.
Originally Posted By: Astro14
you might consider a .300BLK which is all standard parts except for the barrel.
I have three bare lowers left. One will be a .300BLK for sure.
you might consider a .300BLK which is all standard parts except for the barrel.
I have three bare lowers left. One will be a .300BLK for sure.
JHZR2
Staff member
Originally Posted By: Astro14
If you don't have a .308, I really recommend one (the DPMS G2 looks great for example) but requires a dedicated lower. If you've got a standard lower, you might consider a .300BLK which is all standard parts except for the barrel.
I plan on buying a bolt action 300BLK anyway... Probably this:
http://www.impactguns.com/remington-mode...7700842059.aspx
If you don't have a .308, I really recommend one (the DPMS G2 looks great for example) but requires a dedicated lower. If you've got a standard lower, you might consider a .300BLK which is all standard parts except for the barrel.
I plan on buying a bolt action 300BLK anyway... Probably this:
http://www.impactguns.com/remington-mode...7700842059.aspx
300. blackout is a great hunting round too. Any AR in 7.62x39 is a complete waste of time since the .300blackout came out.
Originally Posted By: bubbatime
300. blackout is a great hunting round too. Any AR in 7.62x39 is a complete waste of time since the .300blackout came out.
The .300 blk is a neat round. I would not say the the soviet round is a waste of time. It works for short range penetration and its cheaper to shoot. Cheaper to stock up for shtf.
300. blackout is a great hunting round too. Any AR in 7.62x39 is a complete waste of time since the .300blackout came out.
The .300 blk is a neat round. I would not say the the soviet round is a waste of time. It works for short range penetration and its cheaper to shoot. Cheaper to stock up for shtf.
Here is mine, bad pic though:
https://www.amazon.com/clouddrive/share/aR8jWdDWgaN3X1sm0aB1juG3HhSkJwO_zjfx2Eksr5A
It's my first build. It is a PSA complete upper, with the FN made CHF 1:7 16" barrel. The lower is an Anderson, and the stock is a Magpul MOE. Still waiting on my lower parts kit. And best part is, the total cost will be about $460.
https://www.amazon.com/clouddrive/share/aR8jWdDWgaN3X1sm0aB1juG3HhSkJwO_zjfx2Eksr5A
It's my first build. It is a PSA complete upper, with the FN made CHF 1:7 16" barrel. The lower is an Anderson, and the stock is a Magpul MOE. Still waiting on my lower parts kit. And best part is, the total cost will be about $460.
dnewton3
Staff member
Wow - you guys are ate-up ... the $$$ you spend on guns is overwhelming at times.
I love it!
I love it!
Here is my 5.56 Daniel Defense upper and lower, various other OD parts:
Here is my 6.8SPC Palmetto upper, HD Bolt, DD lower, also OD parts:
In work 10mm AR pistol using these parts including grease gun AR lower:
http://www.rmwxtreme.com/#top
Here is my 6.8SPC Palmetto upper, HD Bolt, DD lower, also OD parts:
In work 10mm AR pistol using these parts including grease gun AR lower:
http://www.rmwxtreme.com/#top
Yep, here is my newly finished build. Everything you see here totals $470. The barrel is a PSA CHF FN barrel.
- Status
Similar threads
