I want to cut oil filters open and post them online i have lots of them to cut open what tool does everyone use? I heard Harbor Freight Has something can anyone tell me what they use?
What Oil Filter Cutter Does Everyone Use
- Thread starter crazyoildude
- Start date
- Status
I know some of the guys use the Longacre cutter.
http://www.amazon.com/Longacre-Oil-Filter-Cutter-LA77750/dp/B005S39PWS
Also theres one from summit
http://www.summitracing.com/parts/sum-900510
Proform
http://www.race-mart.com/product.asp?itemid=327976&gclid=CKSGy-CCkb8CFQMuaQodXm8Azg
Anything that is used to cut exhaust pipe might work
http://www.bavauto.com/fland.asp?part=31...CFTMiMgodSysAzg
http://www.amazon.com/Longacre-Oil-Filter-Cutter-LA77750/dp/B005S39PWS
Also theres one from summit
http://www.summitracing.com/parts/sum-900510
Proform
http://www.race-mart.com/product.asp?itemid=327976&gclid=CKSGy-CCkb8CFQMuaQodXm8Azg
Anything that is used to cut exhaust pipe might work
http://www.bavauto.com/fland.asp?part=31...CFTMiMgodSysAzg
Angle grinder with a cutoff wheel.
Can opener
I use a pipe cutter. Here's a link to a picture.
http://www.bobistheoilguy.com/forums/ubb...ter#Post3134684
http://www.bobistheoilguy.com/forums/ubb...ter#Post3134684
I use the Longacre Oil Filter Cutter mentioned above.
- Joined
- Dec 28, 2011
- Messages
- 5,058
After the whoha of the Puralators I dropped the coin on the Proform. Not cheap, but the machining was very good. Cuts well (I've cut 4 so far) but leaves a sharp edge like a can opener. Overall I'm very happy with it and it is built to last a lifetime.
I do question the availability of spare cutting wheels...haven't addressed that one yet. But the wheels do appear to be the same a pipe cutter.
I do question the availability of spare cutting wheels...haven't addressed that one yet. But the wheels do appear to be the same a pipe cutter.
I use an angle grinder.
Panel Cutter bit on a Air Hammer.
this guy might do it....https://www.google.com/search?q=buck+teeth+pictures&newwindow=1&tbm=isch&imgil=HUoPLkbHc64mDM%253A%253Bhttps%253A%252F%252Fencrypted-tbn3.gstatic.com%252Fimages%253Fq%253Dtbn%253AANd9GcTi4IU8dFjnvzQqxMJ7gd1VoiNW1POGOASVyuT21gARZVBYXkACfQ%253B800%253B598%253Bin4ZVj9qGqW35M%253Bhttp%25253A%25252F%25252Fwww.taylorortho.com%25252FBiteProblems.htm&source=iu&usg=__snjgKMssQq2W9WflgXUpok6AY88%3D&sa=X&ei=78WoU5nnBM_doATiiYGYBQ&ved=0CDcQ9QEwCw&biw=1536&bih=700&dpr=1.25
I too use the Longacre Oil Filter Cutter, expensive but nice.
- Status
Similar threads
