rec me a universal 3/8 Injection rated fuel filter

[eljefino]

^
I want 3/8 barbs at both ends. Splicing up lines on my firebird and I don't want to go through the drama of buying those threaded adapters for the OE filter and then splicing them into my other splices.

Fram G15 meets spec, but I'd prefer to find something in store at Advance Auto.

Conversely, some vehicle the G15 fits, so I can look it up, and cross reference.

Puro F21111 supposedly does it but has a plastic body which to me says "low pressure"... thoughts?

 

[901Memphis]

See what i did with a Wix 33003

http://www.bobistheoilguy.com/forums/ubbthreads.php/topics/3402267/Re:_plastic_fuel_filter_used_a#Post3402267


What is this fuel injected or carb?

 

[eljefino]

injected, 1989 2.8.

Found a "driveworks" F2111, but I don't want a copy of a copy.

The fram G15 specs that it's great for injected vehicles. I might have to hit a NAPA instead, I guess.

 

[ag_ghost]

These three are recommended for fuel injection and use 3/8" barb fittings and were listed as "universal" though each application section has more specifics; e.g., the steel Holley unit notes it's for TBI systems only.
http://www.summitracing.com/search/part-...hment/hose-barb

FWIW, I have had good luck getting answers by Summit when submitting a question online
Kevin

 

[eljefino]

Grumble, I looked up the G15 on fram's website and they only list 1960's carbureted cars as its being appropriate for. Doubtful it can take the pressure.

 

[901Memphis]

Think i found some stuff. Look at this link and check out the part numbers including Fram G7333, Purolator F64702, Wix 33484, AC Delco GF580, Hastings GF246

http://www.ebay.com/itm/like/181277374240?lpid=82

http://www.summitracing.com/parts/wix-33484

http://www.summitracing.com/parts/acf-gf580

http://www.summitracing.com/parts/hht-gf246


Also found Wix 33689

http://www.summitracing.com/parts/wix-33689


Is that what you need?

 

[eljefino]

^ Thanks, gives me something to go on.

Was hoping that, say, my 1995 dodge dakota frame rail mounted filter had the right barbs.

 

[eljefino]

^ Following the above suggestion I ordered a filter for a 91 buick century. Thanks!

 

[901Memphis]

So you got the AC Delco?

 

[eljefino]

Got the "Drive Works."