Recent Topics
ac delco pf52 (longer version of pf47)
by barkingspider
2 minutes 24 seconds ago
Toyota cartridge filter vs. the rest
by chiefsfan1
52 minutes 34 seconds ago
Guest Wifi & Security
by Thermo1223
53 minutes 33 seconds ago
Oil additives of the past and present
by Michael_P
Today at 04:51 PM
MTV's "Pimp My Ride" Was Fake
by Warstud
Today at 04:37 PM
Warren Oil Co.'s Lubrigold vs. RK Synthetic 0w-20
by NormanBuntz
Today at 04:33 PM
Kombucha
by OneEyeJack
Today at 04:32 PM
Engine in a can?
by ceast
Today at 03:41 PM
Oil pan heater restict oil cooling in the summer?
by rustypigeon
Today at 02:21 PM
CNN - "Alpacas on the loose in Arizona"
by NMBurb02
Today at 02:19 PM
YOGA this, YOGA that, YOGA YOGA
by SumpChump
Today at 01:52 PM
Questions about the Quality Field
by racer12306
Today at 01:42 PM
Newest Members
Prodakota11, 388llv, The_Oil_Mole, spooltime, Ktmking
52963 Registered Users
Who's Online
115 registered (99Troopers, 3800Series, AandPDan, 2010_FX4, Al, 12 invisible), 1585 Guests and 186 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
52963 Members
66 Forums
227231 Topics
3623698 Posts

Max Online: 2862 @ 07/07/14 03:10 PM
Donate to BITOG
Page 1 of 2 1 2 >
Topic Options
#3393239 - 06/09/14 05:47 PM 2001 Jeep GC 4.0 with Rotella T6 5679 miles
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
The continuing saga of my reman 4.0 engine. The engine runs fine, decent mileage, no smoke.

Polaris flagged the lead as abnormal (orange) and the oxidation critical (red).

(first to last)

Html:
Test#	1	2	3	4	5
Mileage	9622	5184	5606	5334	5679					
Iron 	146	43	26	28	55   
Chrom 	4	1	1	1	1   
Nickel	1	0	0	0	0   
Alum 	4	1	1	1	2   
Copper  23	12	16	20	24
Lead    15	8	4	3	47 
Tin     2	1	1	1	2
Cadmi   0	0	0	0	0	
Silv    0	0	0	0	0 
Vanad   0	0	0	0	0
Silicon 25	12	13	8	12 
Sodiu   18	6	6	9	15 
Potas   6	1	5	0	0 
Titan   0	1	0	0	0 
Moly    61	58	67	62      61
Antim   1	0	0	1	0 
Mang    2	0	0	0	0 
Lith    0	0	0	0	0
Boron   280	163	30	21	23	
Magn  	14	14	892	1041	1049	
Calc  	3611	2651	1008	814	737
Bari   	0	0	0	0	0
Phos	772	723	868	942	921  
Zinc  	923	864	1103	1189	1143
Fuel	<1	<1	2.2	2.0	<1
Soot	<.1	<.1	<.1	<.1	<.1
Water	<.1	<.1	<.1	<.1	<.1
V@100C	11.1	10.2	12.9	13.3	13.5
TBN   	3.4	4.47	4.22	NES	4.13	
Oxi    	20	25	17	NES	30
Nit     16	12	13	NES	14  


Test#1 PU
Test#2 PU
Test#3 T6
Test#4 T6
Test#5 T6



Obviously the sharp jump in lead is a concern. Copper + lead = bearing failure.

Current change is PP (old formulation).




Edited by Donald (06/09/14 05:49 PM)
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393253 - 06/09/14 06:01 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
actionstan Offline


Registered: 05/22/13
Posts: 475
Loc: Ohio
If its a reman, does it have a warranty? If so I might bring it up with the shop that did it/company that supplied the engine, just to see what they say. Those seem like high/inconsistent numbers, I would personally be a little worried.
_________________________
1999 Saturn SL1
2013 KIA Forte

Top
#3393259 - 06/09/14 06:06 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
NHGUY Offline


Registered: 10/09/11
Posts: 3646
Loc: USA
Factory rebuilt? Marshall engine?

Top
#3393260 - 06/09/14 06:07 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
The reman engine has almost 60K miles on it. Way past the warranty I was given.

Should I consider any action? Even if I knew which bearing was failing what would I do?
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393280 - 06/09/14 06:26 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Kuato Offline


Registered: 10/23/05
Posts: 3439
Loc: Houston TX for the moment
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.
_________________________
Amsoil

04 Jeep Wrangler 2.4 MT 186k
13 F150 5.0 4x4 29k - STOLEN!


There are many idiots in the world. Sometimes I am one of them.

Top
#3393291 - 06/09/14 06:36 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
901Memphis Offline


Registered: 08/14/10
Posts: 6877
Loc: Northern Kentucky
Switch to a 10w30 conventional like PYB and see that lead drop.
_________________________
1999 Ford Taurus 146k (Vulcan v6) - M1 High Mileage 5w30 | Fram Ultra XG 3600
2002 Buick Century 105k - Peak 5w30 / Fram Ultra XG 3980 / Filter mag

Top
#3393303 - 06/09/14 06:47 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Kuato]
actionstan Offline


Registered: 05/22/13
Posts: 475
Loc: Ohio
Originally Posted By: Kuato
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.


If the bearings go back to "normal clearances" wouldn't they at that point be worn, along with the crank, and highly scuffed? I think that would then cause quicker wear, and eventually knocking because loss of oil pressure. The bearing and crank surfaces need to remain smooth.. if clearances were too tight.. I don't think this would be possible.
_________________________
1999 Saturn SL1
2013 KIA Forte

Top
#3393389 - 06/09/14 08:02 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Chris142 Online   content


Registered: 06/05/03
Posts: 12089
Loc: apple valley, ca
bump it up to 15w40.lets see what that does
_________________________
02 Wrangler qsgb 5w30
87 F250 Diesel Mag1 5w40
04 Tahoe super-s 5w30
Z400 maxima 20w50
KLR250 Maxima 10w40
Polaris Trailblazer delo 5w40

Top
#3393398 - 06/09/14 08:08 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Eddie Online   content


Registered: 12/07/03
Posts: 6966
Loc: Florida, Cape Coral
Over reacting to one OCI. Check again after a 5-6K OCI.
_________________________
CX5 Touring 2.5L :-)

Top
#3393423 - 06/09/14 08:35 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: 901Memphis]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
Originally Posted By: 901Memphis
Switch to a 10w30 conventional like PYB and see that lead drop.


This is the 3rd oil change with T6 and this is the first oil change where the lead really shot up.
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393427 - 06/09/14 08:36 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Kuato]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
Originally Posted By: Kuato
Tough question, what to do....T6 should be giving great wear but there's obviously something going on within the engine. You could always try replacing the bearings and see what happens.

Shot in the dark? I'd consider calling the reman company, and find out the specifications on the rebuild to insure they used the right sized bearings; if they were too thick, making the clearances too tight, then you might expect heavy wear, at least until they were back to "normal" clearances.


This was a reman not a rebuild. They would have turned the crank and used the proper bearings for a machined crank.
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393430 - 06/09/14 08:39 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
So if the bearings get loose don't they start squirting more oil on the cylinder walls than the oil rings can handle.

Maybe thats only the rod bearings and a main bearing has the problem.
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393476 - 06/09/14 09:18 PM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: NHGUY]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
Originally Posted By: NHGUY
Factory rebuilt? Marshall engine?


Yes a Marshall reman.
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
#3393741 - 06/10/14 08:01 AM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
dlundblad Offline


Registered: 09/30/13
Posts: 3318
Loc: Indiana
Sorry to see you haven't gotten this issue straightened out Donald. Will the engine manufacturer do anything about this? 60,000 miles is such a shame.

I second the 15w40 trial run, but either way I don't think any oil will make much of a difference.
_________________________
popcorn




Top
#3393754 - 06/10/14 08:13 AM Re: 2001 Jeep GC 4.0 with Rotella T6 5679 miles [Re: Donald]
Donald Online   content


Registered: 03/21/04
Posts: 14255
Loc: Upstate NY
So can one assume its just one bearing? How easy would it be to find that bearing? If its a rod or main bearing could just the bearing be replaced or could the crankshaft have an issue which would require machining.
_________________________
2001 Jeep Grand Cherokee Laredo 4.0 - PP & M1
1999 Dodge Ram 2500 w/Cummins - Rotella T6 & M1
Amsoil ATF in both vehicles & Magnefine filter.

Top
Page 1 of 2 1 2 >