I've been updating the a/c system on my '79 Cadillac CDV, and I'm almost ready to add the refrigerant. Car was originally equipped with an A6 compressor. That's been changed to a modern style 4Seasons aluminum compressor.
So here's my question, the shop manual says to "disconnect the low pressure wire" (did that), and then add a "jumper wire between the terminals of the harness." Would this be the harness connector that plugs into the compressor?
So here's my question, the shop manual says to "disconnect the low pressure wire" (did that), and then add a "jumper wire between the terminals of the harness." Would this be the harness connector that plugs into the compressor?