Has anyone used Moog suspension parts? im looking to get a pair of trailing arm bushings and front lower control arms.
Im really concerned about how well the bushings will hold up. Oem is the way to go but considering the moog lower control arm is only 70 compared to 250+ for oem, i wouldnt mind giving it a try if the bushings are acceptable.
If you've had experience with MOOG aftermarket suspension parts, please share! Thank you.
it's going on my 01 acura integra with 155k miles. The rubber bushings are still good for now but i do see some surface cracks. I say it's held up well for being on coilovers for 100k miles and being driven in primarily SF.
Moog at one time was very good now its just a name, mostly mid grade quality stuff.
The RK line is considered mid grade by Moog, meaning maybe slightly better than white box or white box with better warranty but not much more.
Chances are better than good this part is third world manufacture and low quality, personally i wouldn't touch it with a 10 foot pole. The part is critical for proper handling and alignment.
Seeing its for an Acura i would go with in order of preference OEM, Beck&Arnley (good chance it is an OEM part), Deeza, Raybestos Pro if available.
Mevotech, Moog and white box are not on the list.
There are still a few NOS Moog products around but you have to look at them first, this part was never on the list.
Screwed up zerk threads, incorrect angle zerks, cheap Mickey Mouse boots, off center holes, poor overall quality are all to common with Moog these days.
In 40 years i have only had trouble with two brands of front end parts that cost me time, money and were genuinely poor quality items. Moog and Mevotech.