Recent Topics
Mobil Delvac REBATE. Delvac 1 ESP or LE and 1300
by Scott_mi
03/02/15 08:38 AM
Xterra, bypassed radiator. Any issues?
by Richtrashman
03/02/15 08:08 AM
91 Civic 3dr Hatchback Si clutch pedal
by Gito
03/02/15 08:03 AM
Rrrrrrrrrrrrrr
by buster
03/02/15 07:44 AM
Mobil Delvac 1 ESP and Mobil Delvac 1 LE REBATE
by Scott_mi
03/02/15 07:37 AM
Costco $70 off Bridgestone
by chiefsfan1
03/02/15 05:57 AM
is 10w30 considered heavy duty or similar HDEO ?
by leroyd92
03/02/15 03:13 AM
Centigrad to Fahrenheit made easy
by mjoekingz28
03/02/15 01:07 AM
cold weather roller bearing friction
by used_0il
03/02/15 12:49 AM
Nitrogen fill for $199
by Stewart Fan
03/01/15 10:19 PM
Jeep Cherokee Roaring Drone Noise
by Nick1994
03/01/15 10:09 PM
Magnatec at Walmart and VWB seal
by aquariuscsm
03/01/15 09:54 PM
Newest Members
Koko4, Bianchi, Paul_B, Dexter55, timberjack
53005 Registered Users
Who's Online
96 registered (3for3, Asterix, ARCOgraphite, alarmguy, AdmiralYoda, 10 invisible), 1361 Guests and 192 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
53005 Members
66 Forums
227415 Topics
3627453 Posts

Max Online: 2862 @ 07/07/14 03:10 PM
Donate to BITOG
Page 3 of 3 < 1 2 3
Topic Options
#3310581 - 03/13/14 12:32 PM Re: One of the most hateful repairs I've ever done [Re: chestand]
accent2012 Offline


Registered: 02/08/12
Posts: 441
Loc: Orlando, FL
Ever try changing spark plugs on a 5.4L V8 Triton engine in the F150s? Not fun if they break on you.

Every try doing the same thing but on a 4.3L GMC Jimmy? Also not that fun, but slightly easier ;-).

I recently changed the cabin air filter for my GF's ford fusion. A metal round bar blocked the filter panel. The filter ripped, but managed to get it off after using very long and thin pliers to get in there. Ended up taking 40 minutes to do.

In case you don't know, the filter is located behind the glove box, which is also difficult to remove than my car.

I have no complaints with my Hyundai. Foreign econo cars tend to be very easy to work on for the most part.

+1 on the 3.8L engines eating headgaskets...
_________________________
Hyundai Accent 2012

Top
#3310634 - 03/13/14 01:11 PM Re: One of the most hateful repairs I've ever done [Re: chestand]
Mykl Offline


Registered: 02/08/13
Posts: 1588
Loc: Texas
Clutch job in a Porsche 944.

Not because the job was particularly difficult as far as clutch jobs went, but because the transmission is at the rear axle but it still has to be removed. Thankfully Porsche fixed this for the 968, allowing you to remove the torque tube separately from the gearbox, meaning that a clutch job might take a couple of hours instead of 8 to 12.

I've been told Corvettes since 1997 are a nightmare as well, as you literally have to separate the body from the frame to get to a couple of bolts on the back of the engine.
_________________________
'10 Volkswagen GTI
'07 Toyota Camry XLE V-6

Top
#3310743 - 03/13/14 03:31 PM Re: One of the most hateful repairs I've ever done [Re: A_Harman]
dailydriver Offline


Registered: 03/14/06
Posts: 7448
Loc: Bucks County, Pa.
Originally Posted By: A_Harman
I just replaced the power steering pump on my Camaro last week. It's up high on the front of the engine, but the two bolts that attach it to the cylinder head can only be accessed with an open end wrench, and you can only turn the bolts a half-flat at a time. Oh yes, the ABS module has to be dismounted and moved aside to get any access to the outboard bolt. All told, I was wrenching on those two bolts for about an hour to get them out.

Then I broke the phenolic pulley trying to get it off the pump and had to buy a new one. Then I tried to get smart, and had a local machine shop drill access holes in the new pulley so I could use a socket to run in the bolts. The access holes worked like a charm, and it only took me about 5 minutes to install the new pump. But now I'm worried about durability of my new phenolic pulley because the access holes are chipped at the corners and may cause the web to crack over time.

Some jobs just go wrong from the start.


^^^This is why I went with a Turn One modded pump and their own OEM sized, alloy pulley (with access sections cut into it) already installed and racing wire-tied. wink
_________________________
2000 Z28 1SC 6 speed 175K miles
Red Line 0W-40/Sustina 0W-20 (20/80 mix)
Fram Ultra filter
Motul Gear 300 75W-90/3.8 oz. XL-3
Red Line D4 in the T56

Top
#3310750 - 03/13/14 03:37 PM Re: One of the most hateful repairs I've ever done [Re: HM12460]
dailydriver Offline


Registered: 03/14/06
Posts: 7448
Loc: Bucks County, Pa.
Originally Posted By: HM12460
Originally Posted By: ls1mike
LT1 F-body plug and wire change. W-Body Power steering pump.



Never again will I work on a LT-1 in a 4th generation F body.


The plug change on an LS1 4th gen is not much better. frown
_________________________
2000 Z28 1SC 6 speed 175K miles
Red Line 0W-40/Sustina 0W-20 (20/80 mix)
Fram Ultra filter
Motul Gear 300 75W-90/3.8 oz. XL-3
Red Line D4 in the T56

Top
#3310854 - 03/13/14 05:29 PM Re: One of the most hateful repairs I've ever done [Re: chestand]
HTSS_TR Offline


Registered: 04/17/06
Posts: 13755
Loc: Irvine, CA
Simple thing like replacing headlight bulb in 2006 Volvo V70 is pain in the behind. The full power low beam is used as DRL and it burnt out in less than 1-2 years, replacing it took more than 30 minutes. Right now I use long life Philips H11 bulb to extend it to 2-4 years.

Replacing headlight bulb in the E430 is no more than 1-2 minutes.
_________________________
'94 LS400
'00 E430
'04 S2000
"Consumerism has accustomed us to waste. But throwing food away is like stealing it from the poor and hungry" Pop Francis

Top
#3311057 - 03/13/14 08:41 PM Re: One of the most hateful repairs I've ever done [Re: chestand]
Jarlaxle Offline


Registered: 02/02/12
Posts: 4676
Loc: New England
Worst ever: heater core or AC evaporator on a 1997+ Jeep Cherokee!
_________________________
1979 Coupe de Ville, 542 stroker, parked for winter
1995 Dakota, 5.2, VWB 5W-30, Motorcraft
2012 Suzuki AN400A, M1 10W-40, Caltric, parked for winter

Top
#3311066 - 03/13/14 08:50 PM Re: One of the most hateful repairs I've ever done [Re: dailydriver]
ls1mike Offline


Registered: 06/14/08
Posts: 3442
Loc: In the Garage...
Originally Posted By: dailydriver
Originally Posted By: HM12460
Originally Posted By: ls1mike
LT1 F-body plug and wire change. W-Body Power steering pump.



Never again will I work on a LT-1 in a 4th generation F body.


The plug change on an LS1 4th gen is not much better. frown

Headers help. The wires are easier.
_________________________
Mike
00 Trans Am
02 Silverado 2500HD
04 Grand Prix GTP
13 Equinox
12 Passport TT

Top
#3311144 - 03/13/14 09:37 PM Re: One of the most hateful repairs I've ever done [Re: chestand]
artificialist Offline


Registered: 09/23/07
Posts: 7214
Loc: Florida
After I replaced the water pump on a Chrysler Sebring 2.7, I got terrible flashbacks for a month every time I saw a Chrysler Sebring.
_________________________
2010 Lancer Ralliart Sportback

Top
#3312501 - 03/15/14 07:45 AM Re: One of the most hateful repairs I've ever done [Re: chestand]
asand1 Offline


Registered: 12/16/12
Posts: 1011
Loc: Oregon coast
The worst for me was dropping an engine from a toyota previa to clean carbon from the EGR passages.
_________________________


1996 Maxima 300K
2008 Uplander 80K

Top
#3312585 - 03/15/14 09:45 AM Re: One of the most hateful repairs I've ever done [Re: chestand]
CBR.worm Offline


Registered: 05/10/05
Posts: 1484
Loc: Jupiter, Fl
Oooh. Previa. I had the original Toyota van (2 of them) and my neighbor had a previa w/ SC.

Those were both nightmares for anything more than an oil change.
_________________________
'06 Infiniti G35 Sedan 6MT - 145k

Top
#3312622 - 03/15/14 10:50 AM Re: One of the most hateful repairs I've ever done [Re: chestand]
hattaresguy Offline


Registered: 06/01/11
Posts: 5612
Loc: CT
Working under the hood on American vehicles like my truck. Nothing is laid out with the guy who has to fix it in mind.

Top
Page 3 of 3 < 1 2 3