ARX in motorcycle

Status
Not open for further replies.
Joined
Jun 8, 2004
Messages
139
Location
Michigan
I am about 250 mi into the cleaning phase of arx on my 86 Honda nighthawk cb700sc with 32000 mi. I bought it new and have ran synthetic blends until the last 3 yrs when I started running amsoil. Oil changes have been 3k or less since new. So far the bike seems a bit stronger than I remember
smile.gif
One question I had is the instructions on the arx website state 1000 mi for both the clean & rinse, just want to make sure that is correct or has it been changed? Is the difference in the length between cars & bikes because of the rpm bikes operate at? (60mph in 6th gear is about 4850rpm)
 
I'm near the end of a long, drawn out rinse phase in my '96 Suzuki GS500. The bike didn't have too many miles when I got it, but I figured what the **** give it a shot. Can't say I've noticed any differences. It's due for a change out in ~300 miles, I'll post pics of the filter if anything interesting is in there.

jeff
 
Status
Not open for further replies.
Back
Top