tolune and xylene

Status
Not open for further replies.
Perhaps a question for Molekule,

Are you confident that adding up to 30% by volume Xylene or Toluene will not DAMAGE my O2 sensors?

Furthermore will these items have any damage to the OEM rubber lines?

Thanks,

When i can afford a supercharger it be nice to mess around with race fuels and seeing how far i can advance the timing without destructive pre-detonation. A ford magazine last year showed an aftermarket blower on a 4.6 truck vs timing and fuel. Race fuel + maximum advance made the difference to a safe tune of 35hp+ in addition to standard boost. Amazing-
 
Proloned or continuous may well damage those components. I was referring to occasional racing or professional racing.

My racing associates replace needed components after each race.

BTW, ethanol and methanol have higher R+M/2 blending octane than does toluene and does not affect elastomers as aggressively as toluene. If you're concerned, use the Outlaw with mostly ethanol, fuel Power, and Neutra.
 
Status
Not open for further replies.
Back
Top