Would appreciate your comments on this as this is my first UOA (through Blackstone):
History: car used VW 505.01 oil through first change (always done myself using a Pela extractor pump); 10,000 mile intervals always using after the first change Motul or Elf (both 505.01). Since going out of warranty at 60K, I have used Mobil 1 5W/40 TDT at 10,000 mile intervals. Current sample is at 87,426 miles on engine and 7,426 on current oil:
Code:
Alum 5
Chromium 1
Iron 27
Copper 3
Lead 1
Tin 0
Moly 2
Nickel 1
Manganese 0
Silver 0
Titanium 0
Potassium 3
Boron 33
Silicon 2
Sodium 6
Calcium 1331
Magnesium 804
Phosphorus 939
Zinc 1020
Barium 0
SUS viscosity @210 72.4
cSt viscosity @100 13.59
Flashpoint 390
Fuel % 2.0 (sample was taken after short town trip)
Antifreeze 0
Water 0
Insolubles 0.3
TBN 4.2
Blackstone reports this as an excellent report. Whay say you?? Thanks in advance.
History: car used VW 505.01 oil through first change (always done myself using a Pela extractor pump); 10,000 mile intervals always using after the first change Motul or Elf (both 505.01). Since going out of warranty at 60K, I have used Mobil 1 5W/40 TDT at 10,000 mile intervals. Current sample is at 87,426 miles on engine and 7,426 on current oil:
Code:
Alum 5
Chromium 1
Iron 27
Copper 3
Lead 1
Tin 0
Moly 2
Nickel 1
Manganese 0
Silver 0
Titanium 0
Potassium 3
Boron 33
Silicon 2
Sodium 6
Calcium 1331
Magnesium 804
Phosphorus 939
Zinc 1020
Barium 0
SUS viscosity @210 72.4
cSt viscosity @100 13.59
Flashpoint 390
Fuel % 2.0 (sample was taken after short town trip)
Antifreeze 0
Water 0
Insolubles 0.3
TBN 4.2
Blackstone reports this as an excellent report. Whay say you?? Thanks in advance.
Last edited by a moderator: