Originally Posted By: chevrofreak
Originally Posted By: yesthatsteve
With the steep price increase of the Lubro Moly product, is there any downside to using super fine (~1.5 micron) MOS2 powder mixed into the oil at each OCI? Depending on the concentration you want, and what's already in the oil, you would probably use between 1/5 gram and 1/2 gram of powder per quart of oil.
You can buy a pound for about $50 from a wholesale supplier, and 6 oz. for less than $30 from a shooting supply store.
I'm genuinely curious to hear others' thoughts on this.
I spent several hours yesterday scouring sporting goods stores for powdered moly for just this purpose, but was completely unable to find some. I did find some on eBay pretty inexpensively at roughly $18 shipped for 4oz of ultra fine 98.8% pure powder. I want to use it in some gear oil, so I plan to mix a tablespoon of it into a quart of 75w-140 to see if it will settle out or stay in suspension. If it stays mixed for at least a couple of days, I intend to use some in my rear differential, as well as my power transfer unit. I will also use it for an inexpensive replacement for Lubro Moly MoS2 because of its insane price increase.
Google Rosemill Industries. While its not cheap you can buy ultra fine grade moly which won't get trapped by an oil filter, sold by the pound. I bought it for coating bullets and have also mixed it with MMO or oil for treating engines. I bought it long before the popularity of LM MoS2 on this board, I'm pretty sure its gone up in price, but might still be worth it for you. HTH