which grease?

[85md]

I was looking at Amsoil grease for my Jeep. I am not sure which one to get. I would ned it for the u joints, tie rods, and a few pivot joints. I am confused as to whether the grease needs Moly or not. I understand it at least needs Lithium. I was hoping for a grease that I can use on all the fittings and not have to buy separate types. Thanks in advance.
Paul

 

[Johnny]

This Amsoil grease would serve you well for your application.

Amsoil Grease

to BITOG

 

[85md]

Thanks for the welcome./ CUrious though...what about the whole issue with Moly?
Spicer recommends:

1. Standard Application - Use a good quality E.P. (Extreme Pressure) grease (Timken Test Load 45 lbs. min.) meeting N.L.G.I (National Lubricating Grease Institute) grade 2 specification. Grease must have an operating range of +325°F/ +163°C to -10°F/-23°C and be compatible with commonly used multipurpose greases such as Lithium Soap Types.
Consult your local lubricant source for greases that meet specifications or use Spicer’s recommended lubricant, Chevron® Ultra-Duty EP-2.

Looks like the Amsoil meets everything. I did not see the lower temp number though..