2 cycle oil

Status
Not open for further replies.
Joined
Dec 21, 2010
Messages
82
Location
iowa
I had some left over snow blower gas to get rid of. So I put it in my car. I have heard the benefits of running a little TC oil in as a fuel additive and figured this would be the best way to dispose of it.

I then realized it is not TCW3 rated!!! It does say low ash on the bottle though.

I figured it out and it calculates to about 750:1. Will I notice any problems?
 
No big deal engines are designed to accept oil in the intake thru the PCV inlet up to .1qt/100 miles. This works out to about a 1/2 qt consumed in a tank and 1/2 of fuel; 0.8>1% ash crankcase oil at ~250/1 ratio ingested thru the PCV in normal operation.
 
Last edited:
Nah. I get rid of old TC (not TC-W3) mix that way, also. I messed up on the math, one time, and went as high as 355:1 in my Olds 88. Surprisingly, it ran without problems.

If you want to use 2-cycle oil in your automotive gas regularly, go with TC-W3.
 
Status
Not open for further replies.
Back
Top