2001 Jeep Grand Cherokee code P1757

[Donald]

This code has to do with governor pressure in the transmission. Transmission works and shifts fine. I had a code similar to this fixed a year or two ago where they had to drop the pan and replace a few things at a cost of $500. In that situation the transmission did not shift until 4000 RPM. It shifts fine with this code. How long can I wait to have this fixed?

 

[VNTS]

What engine and transmission, 44 RE with a 4.0 or 545 RFE with the 4.7

In the 44 RE there is a govenor pressure solenoid and a pressure transducer. If you open the pan and have to replace one, you should do both.

I would go to Jeeps unlimted board and do some searches over there. I wouldnt leave it for long, get if fixed


http://www.jeepsunlimited.com/forums/forumdisplay.php?f=21

 

[Donald]

Its the 4.0 engine

 

[daves87rs]

Originally Posted By: VNTS
What engine and transmission, 44 RE with a 4.0 or 545 RFE with the 4.7

In the 44 RE there is a govenor pressure solenoid and a pressure transducer. If you open the pan and have to replace one, you should do both.

I would go to Jeeps unlimted board and do some searches over there. I wouldnt leave it for long, get if fixed


http://www.jeepsunlimited.com/forums/forumdisplay.php?f=21


+1

 

[Donald]

OK, I looked it up and about 20K miles ago and 2 years ago I got a P1762 and a P1757 code, a local transmission shop replaced the governor solenoid and sensor ($500 total bill).

Today I only get the P1757 code. I cleared the code and it cam back in 10 minutes. (Maybe when it warmed up??). Before it would not shift until say 4000 RPM, now it shifts fine.

 

[Gary Allan]

The pressure transducer is about $100