I'm not sure how to get a PDF attatched to the thread but here is what I have from Blackstone. LOOKS AWESOME!!
SHAWN: Nothing unusual turned up in this sample of virgin 5W/20. The viscosity of the oil read right where
it should and no moisture and only a trace of insolubles were found. The TBN read 13.0 so this oil starts out
with a large amount of active additive. When that reading is down around 1.0, virtually all of the active
additive in an oil has been exhausted, rendering it unfit for extended use. Boron and calcium are
detergent/dispersants, while phosphorus and zinc are anti-wear additives. We think this oil should suit your
Alum 1
Chromium 0
Iron 1
Copper 0
Lead 0
Tin 0
MolyB 50
Nickle 0
Mag 0
Silver 0
Titanium 0
Potassium 0
Boron 433
silicon 3
sodium 1
Calcium 2815
Magnesium 10
Phos 691
Sinc 824
Barium 0
SUS Vis @ 210 52.9
Cst Vis @ 100C 8.14
Fuel 0
Antifreeze 0
Water 0
Insolubles Trace
TBN 13.0
Just finished my drive to Las Vegas and the engine runs just as smooth as it did with Redline in it. Milage was up also.
Have at it boys!!
SHAWN: Nothing unusual turned up in this sample of virgin 5W/20. The viscosity of the oil read right where
it should and no moisture and only a trace of insolubles were found. The TBN read 13.0 so this oil starts out
with a large amount of active additive. When that reading is down around 1.0, virtually all of the active
additive in an oil has been exhausted, rendering it unfit for extended use. Boron and calcium are
detergent/dispersants, while phosphorus and zinc are anti-wear additives. We think this oil should suit your
Alum 1
Chromium 0
Iron 1
Copper 0
Lead 0
Tin 0
MolyB 50
Nickle 0
Mag 0
Silver 0
Titanium 0
Potassium 0
Boron 433
silicon 3
sodium 1
Calcium 2815
Magnesium 10
Phos 691
Sinc 824
Barium 0
SUS Vis @ 210 52.9
Cst Vis @ 100C 8.14
Fuel 0
Antifreeze 0
Water 0
Insolubles Trace
TBN 13.0
Just finished my drive to Las Vegas and the engine runs just as smooth as it did with Redline in it. Milage was up also.
Have at it boys!!