Search results

Thermistor at 70 degrees should be 10'000 ohms at 36 degrees should be 29'500 hope this helps

I am a 30 year Maytag tech. First check air flow. If evap is iceed up that's your problem. Remove evap cover check for blockage. Check upper left corner. If all clear check frost pattern evap should be frosty from bottom to top. Very common for this model to have a low performance compressor. If...

Fan motor is ac volts not dc. Between black and orange. Orange is common black feeds the voltage.it also feeds compressor.so if no voltage to orange and black and the compressor is running.i would check black wire

Yes should be 120 volt ac

Green is body ground. Orange is common black is hot or line. It comes from j8 from mother board and it branches off to condenser motor to compressor. Check wires. If compressor is running it's a bad motor or wire from compressor to motor.should be 120 volts between orange and black. Motor ohms...

That's definitely looks like a refrigerant leak. I have seen it many times. That looks like a Maytag or magic chef unit. I have been a authorized Maytag- Whirlpool for 35 years. I have to find leak and repair and then recharge. You can recharge unit it might last 1 or 2 years depending on leak...

Thanks you know more about this than I do. I took a good look with a flashlight. Both filters 8 holes along top mounting plate. Both filters have about same number of holes in center tube. My only issue is the size. The fram is about half the size of the wix holes in center tube. Maybe I am over...

Thanks for the reply. I am not a filter expert. I put the xg 10060 on yesterday but took it off today. I just can't see how 3 rows of holes that are only 1/8 inch or so will flow enough oil. I went back to a wix that has 4 rows of holes and are twice the size. I read xg filters flow better I...

I need some knowledge on a fram xg 10060. I went to put it on my ram hemi.before I put the filter on I looked in side at the tube holes there are only 3 rows of very small holes in the center tube. So I looked in side of a wix i have. I see more holes and they are a lot larger. Just want to know...

Thanks for the nice pics. You always do a nice job.

Thanks for all the nice posts. I used to be a Purolator fan. It looks like the sh... Has hit the fan.

We talk [censored] about China made products but this is no better or even worse.

This crazyoildude seems to me like a man with his panties in a bunch.

If and I mean if they were machine made it would be almost impossible to line up perfectly during manufacturing.

Was on amazon to order mobile 1 syn. 5w20 until I scrolled down it said this product made in China. This must be a misprint. Any ideas.

Look for diabetic socks on amazon. That's what I use. Very loose on top.

I emailed wix about using a 57060xp on my new ram. I told them I been using the 57060 but want to use a 57060xp. I told them I heard that it was only 50% efficient. This is what they emailed me back wix xp oil filters use synthetic media and provide robust protection. when using synthetic motor...