Search results

AFAIK the clutch material should be a fine dark black powder. Anything that is 1/2" long probably isn't coming from the clutches. The clutches are a friction material like brakes are, and hence will create something akin to brake dust as they wear. You should determine if the metal is aluminum...

Twice I bought aftermarket PCV valves for my two Hondas. I can't tell you much about the performance, because they didn't even fit! I had them match part numbers in the computer, so it was the right one. The first one physically didn't fit because I needed one with an elbow, and the straight one...

Throttle position and engine load are directly linked. I feel that it's criticial to minimize the throttle opening for optimum fuel efficiency. If you upshift too early, you'll require a little more throttle pressure to maintain your speed, and since you're increasing load, you are actually...

A new washer requires less torque to create a tight seal, so there is less chance of stripping out the threads. Hondas uses an aluminum crush washer, and I always change the one on my car, and at work, I always change the washer.

lately, whenever I have trouble freeing a stuck bolt I try and tighten it first. Often times it'll move just a hair (not more than that or you'll stretch the bolt) and this breaks the corrosion, and then the bolt comes out.

Awesome toy, and they look fairly durable too. It makes me miss when I had my old R/C car. Too bad the guy who made the video doesn't know the difference between your and you're.

I do remember the owner's manual, and it says it shouldn't need to be lubed, but if you do, use a silicone grease...i think it recommended silicone spray actually. A petroleum based lube will cause the seals to swell and soften, making them prone to damage.

Okay, here's what I've got From my textbook (Automotive Technology 3rd edition by Jack Erjavec, Delmar publishing) http://www.acranox.org/images/table13-2.jpg http://www.acranox.org/images/table13-3.jpg From the Pocket Reference (3rd edition, Thomas J. Glover, Sequoia publishing)...

There is a little book called the "Pocket Ref" You can get it on Amazon It outlines several different lubricants and how to adjust torque accordingly. These numbers are also in my textbook for my automotive class. If anyone wants, I'll post pictures of the pages from the books.

No, it's not a Y. Clearly a picture would be worth a thousand words. Or at least a hundred here, but I don't have a picture available now. Thanks for the help though. I'm sure that the water was going into the intake, it had to have been. I guess maybe there was just enough blowby to put a lot...

I'm not sure I can agree with that. If the intake valve isn't letting enough air into the engine you'll have decreased volumetric efficiency. The less air in the cylinder the less heat and pressure is produced, you'll get lower compression readings. This is why cranking compression is higher...

quick question. What effect, if any, does the water decarbonization trick have on spark plugs?

No, I didn't actually use the PCV valve. Okay here's my best description. There is a piece of hose, about 4 inches long that forms a loop, and both ends connect to the intake manifold. One side of the hose has the PCV valve, which pops into a grommet. On the side with the valve, it appears that...

Okay, so I decided to try the water through the PCV system trick on my 87 Honda Accord. I know there is carbon buildup on the pistons. Anyhow, I took out the PCV valve which is mounted into the intake manifold. One side has a pipe which runs down towards the block, and the other side seems to...

What is the condition of the rear wheel cylinders? It sounds like the cylinders may leak before the shoes need replacing.

diesel has about 10% more BTUs than gasoline. (about 125K for gasoline, and 140K for diesel, per gallon) it looks like crude is actually slightly lower than diesel. So the diesel has more potential energy than the others. Diesel has a higher flash point, but a lower ignition point than gasoline...

A cylinder leakage test puts compressed air into the cylinder (through the spark plug hole) when it's positioned at TDC on the compression stroke. Then you can listen for where the air escapes. You'll also see the percentage of leakage. If one of your valves is leaking I would think you might...

Silk, you're the man. It's an MG Magnette, perfect match. I didn't want to bias anyone, so I didn't include the fact that my mom was visiting over the weekend, and she went and took a look, and saw the MG emblem. It didn't look like any MG I've seen, and it didn't match any pictures I found from...

Hi all. Could anyone tell me what kind of car is in this picture? http://www.acranox.org/gallery/Misc/DSCN2838 (click on the picture to get a larger image) This is a picture from the winter, obviously, it's a few blocks from my house, and I wanted a closer look, but it's all the way in...

If your son started out on a 500 mile trip knowing that he was low on oil, you should disown him. No, that's a little harsh, but you should explain how stupid that was! It's like being thirsty, but deciding to go on a 3 hour walk on the beach without getting something to drink first!